CN 3605
Multiservice Edge Access Multiplexer
Technical information
| System Level | |
|---|---|
| SONET Multiplexing | VT1.5, STS-1 |
| SDH Multiplexing | VC-12, VC-3, VC-4 |
| Synchronization | Line and backup Stratum 3 timing, G.957, G.691 |
| Ethernet over SONET/SDH | LO Virtual Concatenation; HO Virtual Concatenation |
| Link Capacity Adjustment Scheme (LCAS); Generic Framing Procedure (GFP); Ethernet Layer 2 switching, 2.5 Gb/s capacity | |
| 802.1Q VLANs, rate limiting in 1Mb/s increments; 802.1D Rapid Spanning Tree Protocol (RSTP) | |
| Port or VLAN-based CoS; Point-to-point, and multipoint services | |
| Optical Interfaces | |
| Network Interfaces on System Card | |
| 2 Optional OC-3/OC-12 or OC-48 | LC SMF connectors, IR or LR optics using SFP transceivers |
| 2 Optional STM-1/4 or STM-16 | LC SMF connectors, IR or LR optics using SFP transceivers |
| 2 Tributary Interfaces (fixed configurations) | |
| 2 Gigabit Ethernet | LC SMF connectors, SX or LX optics using SFP |
| 6 Fast Ethernet | RJ45 connectors |
| 3 Optional DS3 or E3 | BNC connectors |
| 28 Optional DS1 or 21 E1 | RJ45 connectors |
| Protection | |
| 1+1 APS/MSP, UPSR/SNCP on network interfaces | |
| Optional 1:1 equipment protection on network interfaces; Optional port protection on Ethernet tributary interfaces | |
| Network Management | |
| Local | RS-232 craft interface |
| Node | Management SNMP over Ethernet DCC |
| Management Transport | TCP/IP direct connection (100BaseTX RJ45) or DCC |
| Agency Approvals | |
| Safety | CSA C2.22 No. 60950; UL/IEC/EN60950, CE Mark Eye Safety |
| ANSI | T1.105.02 |
| ETSI | ETS 300 019-1-3, 019-1-3 (Environmental) |
| IEEE | 802.3i, 802.3u, 802.3z, 802.3x, 802.1D, 802.1p, 802.1Q, 802.1W |
| ITU-T | Rec. G.707 & G.783 (VCAT), G.7042 (LCAS), G.7041 (GFP), X.86 |
| Telcordia | GR-253 |
| NEBS | Level 3 Compliant |
| Class 1 EMI | FCC Part 15, Class A; EN 300; EN 55022, Class A |
| Power Requirements | |
| Voltage | 48VDC (Min. -40V to Max. -70V); Dual redundant power feeds; Optional AC power supply |
| Power Consumption | 100 watts maximum |
| Environmental Characteristics | |
| Operating Temperature | -40°C to +65°C |
| Operating Humidity | 5-95% non-condensing |
| Physical Characteristics | |
| Dimensions |
3.5" (H) × 16.5" (W) × 11.8" (D) ? 90 mm (H) × 420 mm (W) × 300 mm (D) |
| Weight | 9.65 lbs. (3.38 kg)—fully configured |
Ciena may from time to time make changes to the products or specifications contained herein without notice.
