CN 2000
Storage and LAN Extension Platform
Technical information
| Line Interfaces to MAN/WAN Network | |
|---|---|
| OC-48 or STM-16 Line Interface Card | 1310 nm SR/IR, 1550 LR, 15xx nm on ITU-T grid |
| OC-12 or STM-4 Line Interface Card | 1310 nm IR/LR |
| OC-3 or STM-1 Line Interface Card | 1310 nm IR |
|
DS3 Line Interface Card GbE Uplink |
Any port on a client module can be provisioned as a GbE uplink |
| Supports combination of SONET/SDH/DS3/GbE line interfaces simultaneously | |
| Client Interfaces | |
| Modular Client Hardware | Supports up to 8 client interfaces with Active Multiplexing and Dynamic Bandwidth Assignment |
| Client Interfaces | Software programmable for FC, FICON GbE, or ESCON |
| Optional Data Compression | Dedicated hardware for each client port |
| Optional FCP SCSI | Write acceleration for open system disk mirroring |
| Industry Standard Client Optics Support (SFP) | 850nm short-wave laser, 1310 nm long-wave laser, ESCON Optics-62.5 & 50 Micron Fiber Support |
| Client Features | |
| FC/FICON | Extended Reach high performance traffic management, provisionable throughput up to 200 MB/s (2.125 Gb/s), full throughput FC/FICON extension |
| GBE | Perfect QoS feature, provisionable throughput up to 125 MB/s (1.25 Gb/s), 100 percent guaranteed Ethernet packet delivery |
| ESCON | Native ESCON transport, provisionable throughput up to 20 MB/s, 100 percent guaranteed ESCON frame delivery |
| Protection Features | |
| GR-253 Compliant 1+1 APS | Fully redundant network interfaces |
| Protection Switch Client By Client Basis | Dynamically adjusts client bandwidth in response to network faults |
| Multi-site connectivity |
STS-1, STS-3c, STS-12c, or STS-48c SONET paths supported, AU-3, AU-4, AU-4-4c, AU-4-16c SDH paths supported Each path can carry multiple client signals |
| Network Management | |
| ON-Center CN 2000 Manager | |
| Management Interfaces | |
| Access Ports | 10/100BT RJ-45 for LAN interconnect, RS-232 DB-9 for local craft interface |
| Command Line Interface | Telnet, SNMP, TL-1 |
| Management Features | |
| Visual Indicators | LED status indicators for client ports, line interfaces, and shelf |
| SONET/SDH Line | Performance Monitoring, GR 253 ITU compliant |
| Protocol specific performance monitoring, Latency monitoring, Auto detection of WWN addressing | Client Interface Features |
| Power Requirements | |
| Module Types | 120/240V AC, -48V DC |
| Environmental Characteristics | |
| Operating Temperature | +0° C to +50° C (+32° F to +122° F) operational; -55° C to +70° C (-67° F to +185° F) storage |
| Physical Characteristics | |
| Dimensions | 5.25" (3 UI) (H) × 19" (W) × 24" (D), 133.4 mm (H) × 482.6 mm (W) × 609.6 mm (D) |
Ciena may from time to time make changes to the products or specifications contained herein without notice.
