2.5 SONET/SDH ADM Card
For ONLINE Metro Multiservice Transport Platform

Technical information
System
Tributary Services OC-3/STM-1, OC-12/STM-4 (software provisionable); intermediate reach optics
Line Interfaces OC-48/STM-16 short reach, intermediate reach and long reach optics
Service Densities 2112 OC-3s muxed per fiber pair or 4224 OC-3s per node
1056 OC-3s switched per fiber pair or 2112 OC-3s per node
256 OC-12s switched per fiber pair or 528 OC-12s per node
Configurations Ring, linear ADM, point-to-point
Timing/Synchronization External synchronization CP provides DS1/E1/2 MHz-clock timing reference with sync status messaging
Protection Options Optical Protection: O-UPSR, O-BLSR SONET 1+1 APS, SONET BLSR
Performance Monitoring
SONET/SDH Tributary side CV-S, ES-S, SES-S, SEFS-S, CV-L, ES-L, SES-L, VAS-L, FE-L
SONET/SDH Line side CV-S, ES-S, SES-S, SEFS-S, CV-L, ES-L, SES-L, UAS-L, FC-L
Power Requirements
Power Consumption 38 W maximum (8 ports)
Fiber Types 1310 nm, Tx; Single mode, Rx: Multi-mode
Single mode Line side: 1310/1550 nm
Tributary side: 1310 nm
Multi-mode Tributary side: 1310 nm
LEDs CP Fail, CP Active, Facility Fail: OC-48, Port 1-4 (4 port CP), Port 1-8 (8 port CP)
Environmental Characteristics
Operating Temperature 0° to 550° C (+320° F to +1220° F)
Compliance
Total Service Capacity OC-48/STM-16
Circuit Pack Configurations Terminal Multiplexer, Add/Drop Multiplexer
Protocol Mapping SONET/SDH conversion
Switch Fabric STS-1 granularity
Number of Ports 4 port CP, 8 port CP, 8 port expansion CP
(Two 8 port CPs for 16 port ADM)
Certification OSMINE Integration for TIRKS, NMA, and TEAM Operations Support Systems
Physical Characteristics
Dimensions (Double wide CP) 10.5" (H) × 1.6" (W) × 9.7" (D)
267 mm (H) × 41 mm (W) × 246 mm (D)


ESCON is a registered trademarks of IBM Corporation.
Ciena may from time to time make changes to the products or specifications contained herein without notice.