CNX-5

Technical information
ATM Functionality
UNI 3.0, UNI 3.1 and TM 4.0-based ATM interfaces
Multiple classes of service including: CBR, UBR, VBR-rt, VBR-nrt, UBRmcdr; and multiple VCs per subscriber
System features large buffers with full multi- grained congestion management, including EPD/PPD and multiple watermarks
Comprehensive ATM OAM (I.610 FM & PM) and ATM/DSL MIBs
Multicast-ready, will migrate to support ILMI auto-configuration of ATU-R, subscriber side SVC, UNI-based SPVC for reduced network operations, and packet services
DSL Standards Compliance
ITU G.992.1 (G.dmt)
ITU G.994.1 (G.handshake)
ANSI T1.413 (Issue 2)
Interoperability
Fully interoperable with all major ADSL chip sets
Reliability and Serviceability
Software and configuration downloads from CatenaView EMS
Full OAM suite, including F5 loopbacks and performance statistics
Power Requirements
Operating Voltage Derived from -48V DC in SLC RT
Robustness
AC Power Fail Detect Feature Enables turn-down of DSL service in the event of a power outage to preserve lifeline POTS battery life
Easy Recovery Relevant DSL provisioning data is stored in non-volatile memory to allow for DSL service recovery from a power outage without EMS intervention
Operating Environment
Operating Temperature Range -40° F to 150° F; -40° C to +65° C
Storage Temperature Range -40° F to 158° F; -40° C to +70° C
Altitude 12,000 ft; 4,000 m
Relative Humidity 5% to 90% non-condensing


Lucent and SLC are registered trademarks of Lucent Technologies.
Ciena may from time to time make changes to the products or specifications contained herein without notice.

Contact us

Use our convenient email form to communicate directly with Ciena

Send Email